Decofix

Decofix is a water-based, solvent-free sealer designed to prepare interior and exterior surfaces for decorative finishes and coatings. Its deep-penetrating formula is especially effective on porous, chalky, or weakened substrates where additional stabilization is needed before finishing.

By strengthening surface cohesion and helping regulate absorption, Decofix creates a more consistent foundation for the coatings that follow. Its ultra-fine polymer technology provides excellent penetration while promoting better adhesion and more uniform application of the final finish.

With extremely low VOC emissions, Decofix provides an effective alternative to traditional solvent-based sealers while delivering reliable surface preparation and performance.

Suitable Surfaces

• Gypsum and plasterboard
• New and existing plasters
• Chalky surfaces and existing paints
• Concrete
• Other compatible porous and absorbent substrates

Dilution

Dilute with water according to substrate absorption:

• Gypsum & plasterboard: 50–100%
• Plasters, chalky surfaces & existing paints: 100–200%
• Concrete: 200–300%

A small on-site test is recommended to determine the appropriate dilution before full application.

Estimated coverage: 1800 sq ft per 15 Lts in 1 coats *

*Click here to see coverage and product disclaimer.

Interior / Exterior

Click here for an application video

To get started placing your order, please follow these simple steps to customize your order:

1. Quantity: First, select the amount of material you need. (Please refer to the "Yield" above to determine how much product you will need. Note that this is based on an average yield. Your yield may vary depending on substrate, application method and/or desired finish.)

2. Color Level (Tint Cost): This is where you'll choose the intensity of your desired color. Please refer to our Color Guide image located on the image carousel for each product. This guide shows the different levels of color darkness, from lightest to darkest.
Important Notes:
   * Carefully compare the colors in the guide to the overall darkness you envision for your final product.
   * The darker the color level you select, the higher the tint cost will be, as it requires more pigment.
   * Sample size does not need a tint level since all tint costs are included for sample material. 

 3. Specific Paint Color Reference: In the text field provided, please enter the exact paint color reference you desire. This could be a brand name and color code (e.g., "Sherwin-Williams SW 7008 Alabaster," "Benjamin Moore 2125-40 Gray Owl"). This ensures we mix the precise color you want.
Important Notes:
* The Color Guide image is a visual representation of color levels. Actual colors may vary slightly due to monitor settings and printing variations.
* By accurately comparing your desired color darkness to the Color Guide, you'll select the correct color level and tint cost.
* Providing the correct paint color reference is critical to receiving the correct color.
* You will be notified if any changes to your order are required.

We're here to help! If you have any questions about color selection, yield or anything at all, please don't hesitate to contact us.