Acquadivetro

Acquadivetro is a clear, water-based protective treatment designed to protect and strengthen mineral surfaces while preserving their natural appearance.

Formulated with siloxane resins and special additives, Acquadivetro provides durable protection for a variety of mineral substrates, including reinforced concrete, lime-based paints and plasters, siloxane paints and plasters, lime putty finishes, and natural stone.

Its transparent finish helps protect the surface without covering or changing the character of the original decorative finish, making it an excellent choice for mineral facades and other surfaces where maintaining a natural appearance is important.

Mix the product thoroughly before application.

Acquadivetro should be applied only after the mineral finish has fully cured. Allow a minimum of 20–30 days after application of the mineral finish under suitable environmental conditions (approximately 25°C / 77°F and 60% relative humidity). This allows the surface pH to decrease below 12 before applying the protective treatment.

Because absorption can vary depending on the surface, we recommend performing a small test area on site to determine the appropriate dilution before proceeding with the full application.

Please note that Acquadivetro may change the appearance and sheen of the treated surface, creating a more matte finish. Always test the product on a small, inconspicuous area before full application.

Acquadivetro can be diluted with up to 30% water. The appropriate dilution should be determined on site by performing a small application test before proceeding with the full application.

Estimated coverage: 100 sq ft per Lt in 1 coats*

*Click here to see coverage and product disclaimer.

Interior/Exterior

To get started placing your order, please follow these simple steps to customize your order:

1. Quantity: First, select the amount of material you need. (Please refer to the "Yield" above to determine how much product you will need. Note that this is based on an average yield. Your yield may vary depending on substrate, application method and/or desired finish.)

2. Color Level (Tint Cost): This is where you'll choose the intensity of your desired color. Please refer to our Color Guide image located on the image carousel for each product. This guide shows the different levels of color darkness, from lightest to darkest.
Important Notes:
   * Carefully compare the colors in the guide to the overall darkness you envision for your final product.
   * The darker the color level you select, the higher the tint cost will be, as it requires more pigment.
   * Sample size does not need a tint level since all tint costs are included for sample material. 

 3. Specific Paint Color Reference: In the text field provided, please enter the exact paint color reference you desire. This could be a brand name and color code (e.g., "Sherwin-Williams SW 7008 Alabaster," "Benjamin Moore 2125-40 Gray Owl"). This ensures we mix the precise color you want.
Important Notes:
* The Color Guide image is a visual representation of color levels. Actual colors may vary slightly due to monitor settings and printing variations.
* By accurately comparing your desired color darkness to the Color Guide, you'll select the correct color level and tint cost.
* Providing the correct paint color reference is critical to receiving the correct color.
* You will be notified if any changes to your order are required.

We're here to help! If you have any questions about color selection, yield or anything at all, please don't hesitate to contact us.